Carpentry designer
Design your bed frame
A bed frame base that sits on the floor or is elevated by 200 mm each side. Enable a feature wall and custom left, right or center cabinets with drawers, open shelves or doors.
Every carpentry piece we price is in the panel below, each on its own rate.
1 bay · 0 drawers · click a drawer or door to open and close it
What are you designing?
Each type starts from its own template and is priced on its own carpentry rates. Switching replaces the current design.
1. Size (mm)
This width is priced as a queen. We build the bed frame base only by default (no headboard), or enable the feature wall and cabinets below.
The base is 400 mm smaller than the top, 200 mm in on every side, so the frame looks raised.
Deeper than 600 mm adds a depth surcharge, confirmed in your quote.
2. Feature wall & cabinets
Add cabinets around the bed
Select Left, Center, Right or Bed base below to customize each one with drawers, open shelves, or doors.
3. Customize bed base
Top to bottom
- mm
Heights add up to 300 mm. A height you type stays; the sections below it take up the difference, so work from the top down. The bottom one borrows from above. Use the arrows to move a section up or down.
5. Doors
No bay has doors yet. Tick "Doors on this bay" above to add them; these settings then apply to every door.
Swing doors open on hinges; a bay wider than 650 mm gets two leaves, and a single leaf's hinge side is set per bay above. Laminate doors match the outside laminate below.
6. Finish
Outside laminate · 2025/26 collection
Natural Woods
Planked Woods
Registered Wood Emboss
Registered Emboss Series
Chevron Design
Herringbone Design
White Woods
Beige Woods
Horizontal Oak
Portpourri Woods
Golden Woods
Oak Species
Timeless Maple
Oak & Teak
Wild Woods
Brown Woods
Tradition Woods
Dark Woods
Rustic Woods I
Rustic Woods II
Obsolete Woods
Wood Series
Light English Oak K 3264 V
Woodgrain · Beige Woods
Colours on screen are a guide. Ask for the physical sample before you confirm.
Price guide
- $750.00
Bed frame, queen
1 pc × $750.00 · 1530 mm wide × 1900 mm long × 300 mm high · elevated base (200 mm inset each side)
- $35.14
Light under the bed
5.02 ft × $7.00 · Warm white · along the elevated base overhang
- $100.40
Colour upgrade
5.02 ft × $20.00 · Light English Oak (K 3264 V) outside in place of standard white
From the OMNIBUILD price matrix, before GST; the first 3 drawers are included. Minimum charge, hardware upgrades and site measurement are confirmed in the quote. Carcass, shelves and drawer boxes in 15 mm plywood faced in PVC or melamine; doors in 18 mm blockboard.
FAQ
Questions, answered.
- Per foot run of width, at our carpentry rates for the type you pick: wardrobe, TV console, storage cabinet or bathroom vanity. Storage cabinets are half-height up to 1.2 m and full-height up to 2.4 m; anything above 2.4 m is built as a separate top cabinet and priced on its own height. The first three drawers are included.
- No. We build to any size. Cabinets deeper than 600 mm have a depth surcharge, confirmed in your quote.
- It is a guide from our real rates, before GST. Minimum charge, hardware and laminate choice, and site measurement are confirmed in the quote.
- No. It is a concept drawing. Our team measures on site and prepares fabrication drawings before anything is made.