Carpentry designer
Design your kitchen
A run of base cabinets, each bay its own height, with a bay you can leave open for the fridge. Add wall-hung cabinets above, at their own depth.
Every carpentry piece we price is in the panel below, each on its own rate.
3 bays · 4 drawers · click a drawer or door to open and close it
What are you designing?
Each type starts from its own template and is priced on its own carpentry rates. Switching replaces the current design.
1. Size (mm)
The kicker sits under the base cabinets. Header height is the gap above the tallest wall cabinet, the same idea as the kicker. Each bay can set its own wall height and depth, so the cabinet over the fridge can differ from the ones beside it. Cabinets finish at 2210 mm.
2. Layout
3. Bay 1 · Drawers & sections
Top to bottom
- mm
- mm
- mm
- mm
Heights add up to 860 mm. A height you type stays; the sections below it take up the difference, so work from the top down. The bottom one borrows from above. Use the arrows to move a section up or down.
4. Doors
Swing doors open on hinges; a bay wider than 650 mm gets two leaves, and a single leaf's hinge side is set per bay above. Laminate doors match the outside laminate below.
5. Finish
Outside laminate · 2025/26 collection
White | Beige
Grey | Black
Blue | Green
Yellow | Brown
High Gloss
White 399 T
Solid colours · White | Beige
Colours on screen are a guide. Ask for the physical sample before you confirm.
Inside finish
PVC
Laminated PVC board
ENF melamine board
White PVC
PVC · white PVC is the standard interior; other finishes are priced as a selected interior
The laminate covers the outside only. Inside, the carcass, shelves and the back of each door are in this finish.
Price guide
- $512.20
Kitchen base cabinets
3.94 ft × $130.00 · per foot of base run · 580 mm deep · bays keep their own height · 70 mm kicker under the base
- $944.40
Kitchen wall cabinets
7.87 ft × $120.00 · 720 mm tall · 320 mm deep, separate from the base · 560 mm above the tallest base
- included
Fridge opening
Bay 3 · 1200 × 1490 mm clear · appliance by others
- $60.00
Additional drawers, soft close
1 pc × $60.00 · 4 drawers · first 3 included · 1 chargeable
From the OMNIBUILD price matrix, before GST; the first 3 drawers are included. Minimum charge, hardware upgrades and site measurement are confirmed in the quote. Carcass, shelves and drawer boxes in 15 mm plywood faced in PVC or melamine; doors in 18 mm blockboard.
FAQ
Questions, answered.
- Per foot run of width, at our carpentry rates for the type you pick: wardrobe, TV console, storage cabinet or bathroom vanity. Storage cabinets are half-height up to 1.2 m and full-height up to 2.4 m; anything above 2.4 m is built as a separate top cabinet and priced on its own height. The first three drawers are included.
- No. We build to any size. Cabinets deeper than 600 mm have a depth surcharge, confirmed in your quote.
- It is a guide from our real rates, before GST. Minimum charge, hardware and laminate choice, and site measurement are confirmed in the quote.
- No. It is a concept drawing. Our team measures on site and prepares fabrication drawings before anything is made.